Thursday, June 23, 2011

Using “SavetheDayter” data upload / down tool


Before downloading a new program to controller you must record the settings and manually re-enter after the download.  A tool has been created or use a tool to capture the process and machine parameters before you download, then restore the data after the download – a good tool to use for this is “save the dater”.  It’s use is outlined below.

Using the Save the Dater tool.


Save the Dater will read / write process / machine setup data.
To use the tool first install the application on your computer.  Next run the application and select a topic to connect to your machine’s processor.  The topic must be configured in RSlinx as the tool uses the RSlinx opc topics. you can download save the dayter here
Select a topic: